時慶實業股份有限公司
About Us EPOXY RESIN PU Series WATERPROOF PAINTS OTHER PRODUCTS Service *
SC#1 KING OF SEA WATERPROOF PAINT
SC#6 HYDROPHILIC ELASTIC PAINT
tel
fax
* Now: Home> WATERPROOF PAINTS > SC#1 KING OF SEA WATERPROOF PAINT * Previous
■ Crack and mildew outer wall ■ Clean off the mildew and peelings ■ Apply evenly with a roller or a brush

INTRODUCTION
Taiwan is located in a subtropical area. It is humid, hot, and has many heavy rains. Therefore it becomes important that paint can resist the complicated weather changes. Generally, outer wall paints are waterproof but they can't endure for a long time. They create seams and cause leaking because the powder layer cracks. Our product of SC#1 uses high-class acrylic latex and it’s good for weather-resistant and anti-tear resistant. After installing, it can protect outer wall from leaking for a long term.

FEATURES

  1. Weather-resistant:
    The strong chemical construction of acrylic foam rubber can resist different kinds of weather and protect the wall for a long time.
  2. Waterproof:
    Well air permeability, low permeability and excellent water-resistant
  3. Tear-resistant:
    Super extension rate can resist the expansion and shrinking of concrete.
  4. Low pollution:
    No solvent, no obnoxious odors, and no air pollution
  5. Economical:
    Easy to install, it can also reduce the improper operation.

RANGE OF USE

  • Outer wall, painting roofing sheet, painting surface, asbestos sheet , wood...etc

APPLICATIONS

  1. It’s use for waterproof for roof and outer wall of building and has excellent effect on appearance.
  2. Protect the surface of painting roofing sheet, asbestos sheet and board from rust and fatigue.
  3. The rate of extensibility exceeds 400% and it has excellent adhesive and can protect it from cracking and bulge.

COST ANALYSIS

Name of material thickness of applications Packaging Weight
Wall (2 times) Floor (3 times)
SC#1 Waterproof Paint 80m²/barrel 80m²/barrel 5gallons 20kg

COATING METHODS

  1. Surface treatment—clean off dust and removed the grit using portable grinder or shaver
  2. Paint treatment—spraying SC#1 on the surface with a roller, brush, or spray gun. Each coat needs 25 kg/m2. If it needs a thickening coating, spraying the paint again and again and it needs to wait for 30 minutes for each time.

NOTICE UNDER INSTALLATION

  1. Make sure that there is no water, mud, or oil on the surface of the structure.
  2. Do not mix with any other solvent or its physical properties will be destroyed.
  3. When repainting is needed, make sure that all the peeling parts are cleaned off. Use sealing material to fill up all the cracks, then installing by standard construction process.
  4. Water can be added to dilute paint, but do not add more than 5%.
  5. This product is a water-based paint. If it is not used up at one time, it can be used later by closing the cover tightly. If water collects on the surface, stir it—it can still be used.
  6. Do not use any sharp object to press it. If there is any damage, repair it with standard construction process to avoid the damage from increasing.
  7. Store in a dry and cool location. Expiration period: one year.
  8. Notice: various color options.
  9. PACKING: 5 gallons.